Worked great, I insulated under a deck with a sun room. Hardest part was crawling under. I used 18 canisters for 196 sq feet. 1.5-2” coverage. Just be sure to remove cobwebs first, the foam won’t punch through. If everything is well shaken and you change cans quickly you don’t need to clean the gun between canisters. Best to have a buddy helping. The tubes suit fit well and in 6’ 2”

Balloons look shiny & they have been up for 2weeks and they still look great.

I have an area behind drywall in the basement that I wanted to seal against occasional water intrusion, and didn't want to run through several smaller spray foam cans to accomplish the job. So, while searching for something larger, I came across this set, which seemed ideal.Upon receipt, I was delighted with the mega-size of the cans. This was plenty for my needs. However, I didn't read the description closely enough to realize I needed dispensing nozzles. So, I returned to Amazon, where I found a set of 12 disposable nozzles by the same company. When they arrived, I was ready to rock my project!What do I think of the results? Unfortunately, I applied the foam in an area I can't reach to take a photo. However, the inevitable droplets of foam that accompany my projects looked great - nice and dense.If you have a large foam project, I highly recommend this kit. Just be sure to pick up some nozzles at the same time:>) A bonus of the disposable nozzles is that you should be able to use part of a can, remove the nozzle, and save the rest for later. That's my theory anyway, and I intend to test it soon.

I used one can of this and it sprayed will and covered properly. I had no issues with this product and if the price is right, I would certainly buy it again.

I absolutely love this product.

I love this spray it doesn’t have a strong smell and it work well

Very impressive size, although that also makes it unwieldy and hard to use in smaller areas. As the product page shows, you have to hold the spray gun and can with BOTH hands.Given the sheer size and volume, it's best NOT to use these as door/window gap filler, but for entire cold plumbing wall cavity. We were struggling to find enough areas to finish a single can.Also somewhat hard to use in tight attic areas since the can dimensions are so large.

We got this to fill in holes made by rodents in the garage over winter! We were shocked at how big the can is compared to the ones you buy in stores! The quality is more on the industrial side which is perfect for what we want! It doesn’t come with a disposable spray nozzle so we chose to get a reusable spray gun specifically for this!

I’m impressed at how strong this stuff is. I had a broken piece of plastic that I’ve glued together with two other types of glue and it still ended up breaking apart. With this glue, so far it has held up. I also glue the soles of my shoes with it and again so far, it has been holding up. I like how these come with different glue thickness. I’ve been using the thick glue so far to give me more time before they set. For some reason, my applicator had a crack in it and the glue filled and dried it up before I even had a chance to use it. Luckily, I was able to remove the broken applicator with pliers and use the replacement they provided. The glue itself was not affected and not dried out and worked on the things I glued together. So far, all the items I’ve glued have been plastic. This is a very nice set and they provide extra parts and items so it should last a while with the replacement parts.

This foam works great. It's a nice sized can for the spray guns but of course you always wish it could be bigger to cover more area.

This spray accelerator, activator for CA glue works great! Just a small spray on applied CA glue - and almost instantly the CA has cured and is rock solid.Great for small inlay work and surface repairs.Highly recommend this for quality and value when you need an instant bond.

We think it was worth the cost. After watching several YouTube videos on how to do the process, we tackled the job with little difficulty. It is, in our opinion, a 2 man job, as the insulation HAS to be vigorously shaken and attached to the spray gun quickly changing out the used canister, which goes fast. By the time my husband finished shaking a can, I was finished & ready to exchange. We ended up getting a fairly even coating, applied a mist of water between layers and repeated. We put 2 solid layers on 1 side of a 40’x9.5’ shipping container. It took 20 cans. The cleaner works perfect also. We purchased extra as we did go through the first can quickly. The cleaner dissolves the insulation in and on the spray gun quickly. We would spray about 3 cans and then clean the gun to keep it from curing and clogging. It worked out pretty smooth. Totally satisfied with the product.

Looking forward to using this. Haven't tried, but everything needed seems to be included. Will update, once we use it.

Great so far!

Love it, no smell , no drip and this can went a long way with the perfect shine