Free Diagnostic Tool

Where is your house
leaking money?

Find the hidden air leaks driving up your bill — and get a personalized IxirPro fix plan in under a minute. No signup, no upsells, just your numbers.

No signup needed · 60 seconds
ENERGY ESCAPING ↑
30%
of home energy can be lost through air leaks
60s
to get your risk score and personalized fix path
Tiny gaps, drafty edges, and unsealed perimeters silently push your bills up — even when nothing in your usage has changed.

The leak you can't see is the one you keep paying for

Small gaps and weak seals stack up into measurable monthly waste. The fix is rarely your HVAC — it's the envelope around it.

01

Hidden Air Leaks

Hairline gaps around frames, sills, attic openings, and pipe entries vent your conditioned air 24/7 — invisible to you, but visible on every bill.

02

Uneven Comfort

That one freezing room, the corner that's always drafty, the floor that never warms — they're rarely a heating problem. They're an air-sealing problem.

03

Wasted Energy

Your system runs harder and longer to chase the air it keeps losing. The result: a higher bill, a worn-out HVAC, and a house that never feels quite right.

Three zones, three afternoons

Most of your energy loss happens in three predictable places. Each one is reachable with a single IxirPro can — no contractor, no scaffolding, no demolition.

SPRAY FOAM SEALED Rim joist seal
Foundation & Crawl Space

Sealing the rim joist line

The wooden band sitting on top of your foundation is the single most-skipped sealing zone in U.S. homes. A bead of IxirPro closed-cell foam closes that band off completely — no fiberglass batts to fall out, no gaps left behind.

15–20% of total home heat loss happens through unsealed rim joists
GARAGE WALL SEALED Draft barrier active
Garage & Attached Walls

Shared walls & door perimeters

The wall between your garage and your living space is rarely sealed properly. Foaming the perimeter, around the door frame, and at every wire or pipe penetration stops cold (or hot) air from migrating straight into conditioned rooms.

Often missed — the garage-to-house boundary is rarely inspected during construction
ATTIC HATCH SEALED Foam perimeter seal Living area below
Attic & Ceiling

Hatch perimeters & top-plate joints

Heat rises straight to your attic — and exits through hatch edges, can lights, and the joints where walls meet the ceiling. Sealing the hatch perimeter alone is the single best dollar-for-dollar fix in most U.S. homes.

ROI #1 — the highest-return single improvement per dollar spent

Four steps. About a minute.

1

Tell us about your home

Quick questions on size, current bills, and where you live — no personal details, no signup.

2

Flag what you've noticed

Drafts, cold floors, uneven rooms — the patterns you've already felt are diagnostic gold.

3

Get your leak score

We map your answers to the zones most likely losing you money — with a clear risk level you can act on.

4

Follow the fix path

A priority-ordered plan with the exact IxirPro products that match your zones — so the first fix is the right fix.

Energy Loss Calculator

Is your home losing
energy right now?

Answer 5 quick questions. We'll estimate your leak risk, flag your priority zones, and match you to the right IxirPro product — no scrolling through random listings.

No login · Under 60 seconds

Question 1 of 5

How big is your home?

Bigger homes mean more surface area — and more opportunities for sealed-but-leaking spots.

Question 2 of 5

What's your average monthly
heating or cooling bill?

A rough range is fine — it tells us how much money is potentially walking out the door.

Question 3 of 5

Which of these sound familiar?

Pick everything that applies — even if it's only sometimes.

Question 4 of 5

Where do you think air
is escaping?

Pick all that look suspect — or choose "Not sure" and we'll start with the fundamentals.

Question 5 of 5 — Almost done

Where should we send
your result?

Your leak score, priority zones, and IxirPro fix list will be in your inbox — so you can come back to it whenever you're ready.

Your Energy Loss Risk

High Risk

0
/ 100

Your home — likely leak zones

Attic access & upper ceiling
Hatches, recessed lights, top plates
Focus area
Windows & doors
Frames, sills, weatherstripping
Focus
Utility penetrations
Pipe & cable entry gaps
Focus
Garage & basement
Rim joists, crawl space, door seals
Focus area

Recommended fix path

What other homeowners found
12,400+homeowners checked this month
73%found at least one high-priority zone
4.8 / 5average helpfulness rating
★★★★★

"Spent five winters blaming my old furnace. Turns out it was the attic hatch the whole time. One afternoon with a can of IxirPro and my bill dropped the next cycle."

Mark T. — Colorado
★★★★★

"Stopped guessing the second I got my result. The basement door perimeter was the real leak — sealed it on a Saturday and the difference is real."

Sarah K. — Ohio
★★★★☆

"A contractor later confirmed exactly what the calculator told me. Saved me a $200 diagnostic and pointed me straight to the IxirPro can I needed."

James R. — Michigan

Estimate based on your self-reported answers. Designed to help you choose a smarter first step — not to replace a professional energy audit.

Common questions

It uses your home size, bill range, comfort symptoms, and suspected zones to estimate how exposed your home is to energy loss. Think of it as a smart starting point — not a substitute for a full energy audit.
No. It's a self-diagnostic tool that points you to the most likely starting point so you don't end up buying random products. For a complete audit, hire a certified energy auditor.
IxirPro makes closed-cell spray foam (R-5.66 per inch), foam guns, and gun cleaner — engineered for window and door perimeters, attic hatches, garage and basement walls, and pipe or cable penetrations. Designed for DIY use.
Yes — most high-impact areas (window and door perimeters, attic hatches, accessible penetrations) are weekend-friendly. The trick isn't skill, it's using the right product on the right surface. The calculator points you to both.
So you can come back to your result whenever you're ready to start the project. We send the occasional home-performance tip — and you can unsubscribe with one click.

Ready to find out?

The right fix starts
with the right diagnosis.

Stop guessing. Find your leak zones, then fix them.